34 EN
Master Page: Left

To Print By Selecting Still Images And Number

Of Prints

1Perform steps 1–6 in “To Print All Still Images
(One Print For Each)” (墌pg.33).
2Rotate the MENU Wheel
to select “CURRENT”, and
press it. The DPOF screen
appears.
3Press 3 or 5 to
select the desired file.
4Rotate the MENU Wheel to select the number
indication (00), and press it.
5Select the number of prints
by rotating the MENU
Wheel towards “R” to
increase number, or
towards “T” to decrease
the number, and press it.
●Repeat steps3 through 5
for the desired number of prints.
●The number of prints can be set up to 15.
●To correct the number of prints, select the
image again and change the number.
6Rotate the MENU Wheel
to select “RETURN”, and
press it. The “SAVE?”
appears.
●If you did not change
any settings in step3
through 5, the Menu
Screen reappears.
7Rotate the MENU Wheel to select “EXECUTE” to
save the setting you have just made, and press it.
●To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1Perform steps 1–6 in “To Print All Still Images
(One Print For Each)” (墌pg.33).
2Rotate the MENU Wheel to select “RESET”, and
press it. The DPOF screen appears.
3Rotate the MENU Wheel to select “EXECUTE”,
and press it. The normal playback screen
appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still
images.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1Set the Playback Mode Switch to “MEMORY”.
2Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3Open the LCD monitor fully, or pull out the
viewfinder fully.
4Press the MENU Wheel in.
The Menu Screen appears.
5Rotate the MENU Wheel
to select “FORMAT”, and
press it. The FORMAT
screen appears.
6Rotate the MENU Wheel
to select “EXECUTE”, and
press it. The memory card
is initialized.
●When initialization is finished, “NO IMAGES
STORED” appears.
●To cancel initialization, select “RETURN”.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
RETURN
SHEETS
DPOF
00
SHEETS
DPOF
05
DPOF
EXECUTE
SAVE?
CANCEL
Initializing A Memory Card
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialization.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialization.
MENU
DISPLAY
BRIGHT
END
PROTECT
DELETE
DPOF
NO.RE SET
FORMAT
ORMATF
EXECUTE
DATA?EXIST I NG
ERASE ALL
RETURN
D.S.C. PLAYBACK (cont.)
GR-HD1US.book Page 34 Monday, April 14, 2003 5:21 PM