50 EN
Master Page: Left
Wipe/Fader effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
Wipe or Fader works when video recording is started
or stopped.
There are 9 types of Fader/Wipe Effects for scene
transition.
FADER–WHIT E: Fade in or out with a white
screen.
FADER–BLACK:Fade in or out with a black
screen.
FADER–B.W:Fade in to a color screen from a
black and white screen, or fade out from color to
black and white.
WIPE–CORNER:Wipe in on a black screen
from the upper right to the lower left corner, or wipe
out from lower left to upper right, leaving a black
screen.
WIPE–WINDOW:The scene starts in the
center of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the center.
WIPE–SLIDE:Wipe in from right to left, or
wipe out from left to right.
WIPE– DOOR: Wipe in as the two halves of a
black screen open to the left and right, revealing the
scene, or wipe out and the black screen reappears
from left and right to cover the scene.
WIPE–SCROLL:The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
WIPE– SHUTTER: Wipe in from the center of
a black screen toward the top and bottom, or wipe
out from the top and bottom toward the center
leaving a black screen.
1Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the
viewfinder fully.
3Press FADE/WIPE. The WIPE/FADER screen
appears.
4To activate the Fade-in or Wipe-in:
Rotate the MENU Wheel to select the desired
effect and press it during Record-Standby mode.
●The selected effect indicator appears.
To activate the Fade-out or Wipe-out:
Rotate the MENU Wheel to select the desired
effect and press it during recording.
●The selected effect indicator appears.
5Press the Recording Start/Stop Button to activate
the Fade-in/out or Wipe-in/out.
To deactivate the selected effect…
Select “OFF” in step 4. Or, set the Power Switch to
“A”.
NOTES:
●You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
●Wipe Effects is not activated when the recording
mode is set to “HD”.
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE or Special Effects. If an
unusable Wipe/Fader Effect is selected, its indicator
blinks in blue or goes out.
Program AE allows you to shoot images according to
various situations.
SPORTS
(Variable Shutter Speed:1/250 – 1/1000)
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slow-
motion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
SNOW:Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the snow.
SPOTLIGHT:Compensates for subjects that
may otherwise appear too bright when shooting
under extremely strong direct lighting such as
spotlights.
NOTE:
“SPOTLIGHT” has the same effect as –3 with the
exposure control. (墌pg.44)
Wipe Or Fader Effects
Lock Button
Power Switc h
FADE/WIPE Button
MENU Wheel
P.AE Bu tto n
EFFECT Button
Program AE
FEATURES FOR RECORDING (cont.)
GR-HD1US.book Page 50 Monday, April 14, 2003 5:21 PM