EN 57
Master Page: Right
Still images can be dubbed from a tape to a memory
card.
1Load a cassette. (墌pg.18)
2Load a memory card. (墌pg. 19)
3Set the Playback Mode Switch to “VIDEO”.
4Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
5Set “ COPY” to “ON”. (墌pg.35, 41)
6Press 4·9 to start playback.
7At the point you want to dub, press 4·9 again to
engage Still Playback.
8To dub the image, press SNAPSHOT.
●The “ ” indication appears during
dubbing.
●The selected image is stored in the memory
card.
NOTES:
●If SNAPSHOT is pressed in step8 when a memory
card is not loaded, the message “COPYING
FAILED” is displayed.
●If an image recorded on the tape using “DV
WIDE” (墌pg.38) is dubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
●To use Playback Special effects with a video image
you wish to dub, perform up to step8 using the
remote control (provided). (墌pg.60)
●Images are dubbed in the following image sizes:
Scenes recorded in HD mode: 1280x 720 pixels
Scenes recorded in SD mode: 848x 480 pixels
Scenes recorded in DV mode: 640x 480 pixels
Dubbing Still Images Recorded On A Tape To A Memory Card
Power Switc h
SNAPSHOT Button
Lock Button
MENU Wheel
Play/Pause Button (4·9)
Playback Mode Switch
ADVANCED FEATURES
GR-HD1US.book Page 57 Monday, April 14, 2003 5:21 PM