Software Issues

This section describes software specific issues and workarounds.

XCP Issues and Workarounds

TABLE 6 lists known XCP issues and possible workarounds.

TABLE 6 XCP Issues and Workarounds

ID

Description

Workaround

 

 

 

RTIF1- While XSCF is running, a process may go 070418-009 down, a watchdog timeout may occur, or a

hang-up may occur. After this, XSCF may reset.

RTIF1- While XSCF is running, watchdog timeout 070528-002 may occur and XSCF may reboot.

RTIF1- Using the XSCF Web, when you selected SSH 070823-001 on the snapshot screen, the maximum number of character input for Host, Directory, ID, and Password doesn't correspond to the maximum number of character input on the XSCF Shell.

RTIF1- When you display the Logical tree on the 070823-003 XSCF Web, the hardware configuration of CPU

or memory which assigned to the domain appears differently from the actual domain configuration.

RTIF1- On the XSCF Web, when you select Domain 070824-002 Mode Configuration to perform various

settings, the pop-up screen may not appear but "Undefined" may be displayed on the screen.

RTIF1- On the XSCF Web, on the Domain Status 070824-004 screen, when you select an XSB displayed on

the Domain Component List, and in case the selected XSB is not yet mounted or is Uni-XSB, the pop-up screen displays no data.

Check that XSCF is started. If not started, use the rebootxscf(8) command to restart XSCF, or stop all the domains and then execute the system power off/on (AC OFF/ON).

Check that XSCF is started. If not started, use the rebootxscf(8) command to restart XSCF, or stop all the domains and then execute the system power off/on (AC OFF/ON).

To specify the value which exceeds the maximum number of character input for the XSCF Web, use XSCF Shell.

On the Menu, select Device Status to refer to the domain hardware configuration. Or use the showdevices(8) command to refer to the domain hardware configuration.

Select Domain Mode Configuration one more time and perform the settings. Or once terminate the XSCF Web and then perform the settings.

None available at this time.

SPARC Enterprise M4000/M5000 Servers Product Notes 15