8.Update the firmware by using the flashupdate(8) command.

Caution – flashupdate(8) will update one bank, reset the XSCF and commence update of the second bank. Verify that the current and reserve banks are both updated. If both banks indicate XCP revision 1060, proceed to the next step.

XSCF> flashupdate -c update -m xcp -s version

Specify the XCP version to be updated. In this examples, it's 1060.

9.Confirm completion of the update.

XSCF> showlogs event

Confirm no abnormality happens while updating.

10.Confirm that both the current and reserve banks of XSCFU#0 display the updated XCP versions.

XSCF> version -c xcp

XSCF#0 (Active)

XCP0 (Reserve): 1060

XCP1 (Current): 1060

If the Current and Reserve banks on XSCF#0 do not indicate XCP revision 1060, contact your authorized service representative.

11.Confirm no abnormality occurred by using showlogs error -vand showstatus(8) commands.

XSCF> showlogs error -v

XSCF> showstatus

If you encounter any hardware abnormality of the XSCF contact your authorized service representative.

12.Power on all domains.

XSCF> poweron -a

32 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • November 2007