Fujitsu MAP3147FC, MAP3735FC manual Illustrations

Contents

Illustrations

Figures

Figure 1.1	FC model drives outer view	1-5
Figure 1.2	Disk/head configuration	1-6
Figure 1.3	Example of FC-AL system configuration	1-7
Figure 3.1	Cylinder configuration	3-2
Figure 3.2	Spare area in cell	3-5
Figure 3.3	Alternate cylinder	3-5
Figure 3.4	Track format	3-6
Figure 3.5	Track skew/head skew	3-7
Figure 3.6	Sector format	3-7
Figure 3.7	Alternate block allocation by FORMAT UNIT command	3-12
Figure 3.8	Alternate block allocation by REASSIGN
	BLOCKS command	3-13
Figure 4.1	External dimensions	4-2
Figure 4.2	IDD orientations	4-3
Figure 4.3	Mounting frame structure	4-4
Figure 4.4	Limitation of side-mounting	4-4
Figure 4.5 Surface temperature measurement points		4-5
Figure 4.6	Service clearance area	4-6
Figure 4.7	Current waveform (+12 VDC)	4-7
Figure 4.8 AC noise filter (recommended)		4-8
Figure 4.9	Connector location	4-9
Figure 4.10	SCA2 type connector	4-10
Figure 5.1	Checking the IDD connection (A)	5-8
Figure 5.2	Checking the IDD connection (B)	5-9
Figure 6.1	Revision label (example)	6-9
Figure 6.2	Indicating revision numbers	6-10
Figure 6.3	Test flowchart	6-11
Figure 7.1	Format of extended sense data	7-2

xvi C141-E163