Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MAS3735NC/NP, MAS3184NC/NP, MAS3367NC/NP manual Surface temperature check point, Hdc, Mpu

Models: MAS3367NC/NP MAS3184NC/NP MAS3735NC/NP

1 130
Download 130 pages 40.65 Kb
Page 56
Image 56

(3)Limitation of bottom-mounting

Use all 4 mounting holes on the bottom face.

(4)Environmental temperature

Temperature condition at installed in a cabinet is indicated with ambient temperature measured 30 mm from the disk drive. At designing the system cabinet, consider following points.

•Make a suitable air flow so that the DE surface temperature does not exceed 60°C.

•Cool the PCA side especially with air circulation inside the cabinet. Confirm the cooling effect by measuring temperature of specific ICs and the DE. These measurement results should be within a criteria listed in Table 4.1.

Table 4.1 Surface temperature check point

No.

Measurement point

Criteria

 

 

 

1

Center of DE cover

60°C

 

 

 

2

Read channel LSI

88°C

 

 

 

3

VCM/SPM Driver

92°C

 

 

 

4

HDC

91°C

 

 

 

5

MPU

91°C

 

 

 

3

1

4

5

2

 

Figure 4.6 Surface temperature measurement points

4-6

C141-E185

Page 55 Page 57
Page 56
Image 56
Fujitsu MAS3735NC/NP, MAS3184NC/NP, MAS3367NC/NP manual Surface temperature check point, Hdc, Mpu
Page 55 Page 57

MAS3367NC/NP, MAS3184NC/NP, MAS3735NC/NP specifications

Fujitsu's MAS series hard drives, including the MAS3735NC/NP, MAS3184NC/NP, and MAS3367NC/NP, are designed for enterprise applications requiring high performance, reliability, and efficiency. These drives are notable for their ability to manage extensive workloads, making them ideal for demanding server and storage environments.

The MAS3735NC/NP is a 3.5-inch hard drive that operates at 15,000 RPM, providing exceptional data access speeds. With a storage capacity of up to 300GB, this model is optimized for high transaction applications, such as databases and email servers. Its advanced 16 MB buffer ensures that data is managed smoothly, significantly reducing latency and improving overall system performance. The drive employs SAS (Serial Attached SCSI) interface technology, which enhances data transfer rates and provides better reliability compared to traditional SATA interfaces.

The MAS3184NC/NP model features a generous 146GB storage capacity, operating at a slightly lower peak performance of 10,000 RPM. However, it still provides substantial speed and reliability for various server applications. The advanced features of this drive include enhanced error recovery, which minimizes the risk of data corruption, as well as a power-saving mode that reduces energy consumption without compromising performance.

Next in the series, the MAS3367NC/NP offers a combination of capacity and speed. With up to 300GB of storage and also spinning at 15,000 RPM, it matches the performance levels of the MAS3735. This drive utilizes dual-port 6Gb/s SAS technology, which not only boosts data transfer rates but also adds redundancy, thus ensuring continuous availability for mission-critical applications.

All models in this range are designed with advanced technologies such as S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology), which helps monitor the drive's health and predict potential failures before they occur. Additionally, these drives are built to meet rigorous environmental and physical standards, ensuring durability and longevity in various applications.

In summary, Fujitsu’s MAS3735NC/NP, MAS3184NC/NP, and MAS3367NC/NP hard drives showcase a perfect blend of speed, capacity, and reliability, solidifying their position as leading choices for enterprise-level storage solutions. With their advanced technologies and features, these drives are tailored for environments where performance and reliability are non-negotiable requirements.