Fujitsu MHV2100BH, MHV2120BH, MHV2080BH, MHV2040BH, MHV2060BH manual Xii C141-E224

Contents

	5.2.3.6 BIST Active - Bidirectional		5-20
	5.2.3.7 Data - Host to Device or Device to Host (Bidirectional)		5-21
	5.2.3.8 PIO Setup – Device to Host		5-21
	5.2.3.9 Set Device Bits – Device to Host		5-23
5.2.4	Shadow block registers		5-24
5.3 Host Commands			5-29
5.3.1 Command code and parameters			5-29
5.3.2	Command descriptions		5-32
	(1)	RECALIBRATE (X’10’ to X’1F’)	5-33
	(2)	READ SECTOR(S) (X’20’ or X’21’)	5-34
	(3)	WRITE SECTOR(S) (X’30’ or X’31’)	5-36
	(4)	WRITE VERIFY (X’3C’)	5-38
	(5)	READ VERIFY SECTOR(S) (X’40’ or X’41’)	5-40
	(6)	SEEK (X’70’ to X’7F’)	5-42
	(7)	EXECUTE DEVICE DIAGNOSTIC (X’90’)	5-43
	(8)	INITIALIZE DEVICE PARAMETERS (X’91’)	5-44
	(9)	DOWNLOAD MICROCODE (X’92’)	5-45
	(10)	STANDBY IMMEDIATE (X’94’ or X’E0’)	5-47
	(11)	IDLE IMMEDIATE (X’95’ or X’E1’) /UNLOAD
		IMMEDIATE (X’95’ or X’E1’)	5-48
	(12)	STANDBY (X’96’ or X’E2’)	5-50
	(13)	IDLE (X’97’ or X’E3’)	5-51
	(14)	CHECK POWER MODE (X’98’ or X’E5’)	5-53
	(15)	SLEEP (X’99’ or X’E6’)	5-54
	(16)	SMART (X’B0’)	5-55
	(17)	DEVICE CONFIGURATION (X'B1')	5-72
	(18)	READ MULTIPLE (X’C4’)	5-77
	(19)	WRITE MULTIPLE (X’C5’)	5-80
	(20)	SET MULTIPLE MODE (X’C6’)	5-82
	(21)	READ DMA (X’C8’ or X’C9’)	5-84
	(22)	WRITE DMA (X’CA’ or X’CB’)	5-86
	(23)	READ BUFFER (X’E4’)	5-88
	(24)	FLUSH CACHE (X’E7’)	5-89
	(25)	WRITE BUFFER (X’E8’)	5-90
	(26)	IDENTIFY DEVICE (X’EC’)	5-91

xii C141-E224