Fujitsu MHV2060BH, MHV2120BH, MHV2100BH manual Information to be read by Identify Device command 3/3

5.3 Host Commands

Table 5.25 Information to be read by IDENTIFY DEVICE command (3/3)

Word	Value	Description
117-118	X’0100’	Number of words for logical sectors
119	X’000x’	Features Implemented Word (Supported Settings)
120	X’000x’	Features Implemented Word (Enabled Settings)
121-127	X’0000’	Reserved
128	X’0xxx’	Security status	*23
129-159	X’xxxx’	Undefined
160-254	X’0000’	Reserved
255	X’xxA5’	Check sum (The 2 complement of the lower order byte resulting from
		summing bits 7 to 0 of word 0 to 254 and word 255, in byte units.)

	*1 Word 0:		General configuration
	Bit 15:		ATA device = 0, ATAPI device = 1
	Bits 14-8:		Undefined
	Bit 7:		Removable disk drive = 1
	Bit 6:		Fixed drive = 1
	Bits 5-3:		Undefined
	Bit 2:		IDENTIFY DEVICE Valid = 0
	Bits 1-0:		Reserved
	*2 Word 1, 3, 6, 60-61
Word	MHV2120BH	MHV2100BH		MHV2080BH	MHV2060BH	MHV2040BH
1	X’3FFF’		X’3FFF’	X’3FFF’	X’3FFF’	X’3FFF’
3	X’10’		X’10’	X’10’	X’10’	X’10’
6	X’3F’		X ’3F ’	X’3F’	X’3F’	X’3F’
60-61	X’DF94BB0’	X’BA52230’		X’950F8B0’	X’6FC7C80’	X’4A85300’
	*3 Status of the Word 2 Identify information is shown as follows:
	37C8h		The device requires the SET FEATURES sub-command after the
			power-on sequence in order to spin-up. The Identify information
			is incomplete.

C141-E224 5-95