Fujitsu P42-1A, P42-2, P50-2 PICTURE menu - picture settings

MYRICA P42-1A / P42-2 / P50-2
A26361-K1040-Z120-1-M119, edition 3 English - 25
PICTURE menu - picture settings
► Press the MENU button to open the OSD menu.
► Mark the PICTURE menu item with the / buttons.
► Press the MENU button to activate the menu item.
The buttons available to you for setting the options are shown in the menu footer.
Mode With this function you set the picture mode.
The contrast, brightness, colour and focus of the picture are set to optimum
values depending on the picture mode.
Possible values: Standard, Vivid, Mild, User.
Temperature With this button you set the colour temperature.
Possible values: Cool2, Cool1, Normal, Warm1, Warm2.
Video NR With this function you switch the picture correction (Noise Reduction) on or
off.
Possible values: On, Off
Screen form With this function you set the picture format.
Possible values: 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3.
With these functions you set the position and the synchronisation of the
picture display.
To set the picture display, first use the Auto function and correct the picture
display and, if necessary, then with the other functions.
These functions are only available when PC is selected as the signal
source.
H Position With this function you set the horizontal picture
position.
V Position With this function you set the vertical picture position.
Phase With this function you fine-tune your display to
eliminate picture interference.
Geometry
(in PC mode only)
Auto With this function you optimally set the picture display
automatically.
Downloaded From TV-Manual.com Manuals