Fujitsu PART NAMES AND FUNCTIONS (Continued)

E-8
1/I power switch
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power
can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state,
the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.
2RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PC’s display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
4RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
5Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION – LOWER PART
Bottom (P42VHA10 type)
Bottom (P42HHA10 type)
Bottom (50”)
Bottom (P42VHA20 type)