Fujitsu P42HHA10A, P42HHA10W, P42VHA10W Selecting Input Mode, Video Input Mode, RGB Input Mode

SELECTING INPUT MODE

VIDEO INPUT MODE

1

Press the – buttons to select the input mode.

You can select from VIDEO1 mode to VIDEO4 mode.

The video modes corresponding to each input terminal are as follows.

• VIDEO1: Video Video1 mode

•VIDEO2: S-video

•VIDEO3: Component video

•VIDEO4: Component video

*For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-35.

*You can also use the buttons on the display’s control panel to perform these steps.

RGB INPUT MODE

1

Press	–	to select the
input mode.
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as
follows.
• RGB1: DVI-D
		RGB1 mode
• RGB2: mD-sub

E-20