VCR

•Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)

•Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)

To SCART output

To SCART input

An example of the underside of the display

(with the P-TE1000E installed in the P42VHA10)

To video output

To S-video output

To audio output

To audio input

To S-video input

To video input

An example of the underside of the display

(with the P-TE1010E installed in the P42VHA10)

Note

•Unplug the power cord from the AC outlet before you connect external components.

•Also refer to the instructions for the component to be connected.

•When inputting audio, connect to the terminals corresponding to the used video input or RGB input.

English

E-15