SELECTING INPUT MODE

VIDEO INPUT MODE

1

*You can also use the buttons on the display’s control panel to perform these steps.

Press the – buttons to select the input mode.

You can select from VIDEO1 mode to VIDEO4 mode.

The video modes corresponding to each input terminal are as follows.

•

VIDEO1: SCART (when P-TE1000E is

Video1 mode

 

installed), Video (when P-TE1010E is installed)

 

•

VIDEO2: S-Video (when P-TE1010E is

 

 

installed)

 

•

VIDEO3: Comp. video (when P-TE1010E is

 

 

installed)

 

•

VIDEO4: Comp. video

 

*For selection of the input terminal, see

“SETTING THE INPUT TERMINALS” on P. E-36.

*You can select between RGB3 and VIDEO4 in

INPUT TERMINALS.

RGB INPUT MODE

1

Press – to select the input mode.

You can select between the modes from RGB1 to

RGB3.

The input terminal of each RGB mode is as follows.

• RGB1: DVI-D

RGB1 mode

 

•RGB2: mD-sub

•RGB3: BNC

E-20