•FEATURES setup screen has the following 5 options.
Adjustment | : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. |
Function | : Allows setting of |
On Screen Menu : Can make a display setting such as OSD, Language. (See P. | |
Input Terminal | : Can make an input terminal setting such as Video Input. (See P. |
Others | : Can make other settings. (See P. |
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with , and then adjust with . Finally, press to implement the adjustments.
Adjustment Item | Contents of Adjustments |
| Operation | Adjustment Range/Remarks |
|
|
|
|
|
Dot Clock | You may find that pictures blur, depending on the | Use | to select the optimal value | |
(RGB2, RGB3) | clock frequency of your PC’s processor. | at which blurring of pictures is |
| |
| If you experience blurring, you can obtain a clearer | eliminated. |
| |
| picture by adjusting the “Dot Clock”. |
|
|
|
|
|
|
|
|
Clock Phase | Pictures may blur as the clock phase of your PC | Use | to select the optimal value | Auto/Manual |
(RGB2, RGB3) | may be different. In this case, adjust the clock | at which blurring of pictures is | Manual: 1 to 32 | |
| phase manually. Normally, the automatic setting | eliminated. |
| |
| ensures the optimal value. |
|
|
|
|
|
|
|
|
Clamp Position | Adjusts the clamp position in accordance with the | Use | to select the optimal value. | |
(RGB2, RGB3, | input signal received from connected equipment. |
|
|
|
Comp. video) | Normally, the automatic setting ensures the optimal |
|
|
|
| value. |
|
|
|
|
|
|
| |
Auto Calibration | Adjusts the dynamic range of images to the | Display the Auto Calibration screen | Execute/Cancel | |
(RGB2, RGB3) | optimum. Performed while a white screen signal is | and select Execute, and then use |
| |
| received. |
| to select the item. |
|
|
|
|
|
|
*
English