•D-SUB Input

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1)Select D-SUB Input and press . D-SUB Input screen appears.

(2)Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC.

Decoder: For using digital broadcast tuner.

(3)Press or to select Mask.

(4)Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

(5) Press to store.

•DVI Input

You can select the signal method input to the DVI input terminal. Each time or is pressed, the setting is changed.

DVI1 DVI2

DVI1:

Used when connecting to a PC.

DVI2:

Used when connecting to a DVD player or digital tuner.

Press

to store.

* Set according to the signal method before connecting peripheral device.

“D-SUB Input” selection screen

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1234567890123456789012345678901

This fringe part is masked.

English

* On-screen information disappears if you do not take any action for about 60 seconds.

E-37