SATELLITE TUNER

•Connect the video signal cable to either the component video terminal or the SCART terminal. (When the P-TE1000E is installed.)

•Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal. (When the P- TE1010E is installed.)

•If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal.

English

To SCART output

To component video output

To audio output

To component video input

To SCART input

To audio input

An example of the underside of the display

(with the P-TE1000E installed in the P42VHA10)

To component video output

 

 

To video output

To video input

 

To S-video output

 

 

To audio output

 

 

To audio input

To S-video input

To component

video input

An example of the underside of the display

(with the P-TE1010E installed in the P42VHA10)

Note

•Unplug the power cord from the AC outlet before you connect external components.

•Also refer to the instructions for the component to be connected.

•When inputting audio, connect to the terminals corresponding to the used video input or RGB input.

E-17