OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

OTHER SETTINGS

DPMS

for other than RGB1

 

 

 

 

 

You can use this option to select the amount of time before the DPMS function starts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DPMS (which stands for “display power management signaling”) allows the display to maintain an

 

 

 

 

 

automatic power saving function.

 

 

 

 

 

 

This function causes on-screen information to disappear until the next input operation, if the power

 

 

 

 

 

is ON and the display has not received any signals for the predetermined period of time. When

 

 

 

 

 

DPMS is active, the power indicator lamp turns orange.

 

 

 

 

 

 

 

 

 

 

 

 

(1) Select DPMS and press .

 

 

 

 

 

 

DPMS selection screen

 

DPMS screen appears.

 

 

 

 

 

 

(2)Press or to select Time.

(3)Each time you press or , one of the available choices appears in the following sequence:

Off:

Disables DPMS

Number:

Approximate time before DPMS starts. (Unit: minutes)

*The power indicator lamp turns orange while the DPMS is ON.

*The power turns ON automatically when the display receives a signal.

(4) Can specify background colour.

Press or to select background colour.

Each time you press or , one of the available choices appears in the following sequence:

Black White

Black: Mutes images in Black background.

White: Mutes images in White background.

*Switches approx. 20 seconds after the display stops receiving signals.

(5)Press to store.

• Audio Input

You can use this option to select one of the three available terminals to receive sound from input equipment.

(1)Select “Audio Input” and press .

The “Audio Input” selection screen will appear.

(2)Press or to select input equipment.

(3)Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

“Audio Input” selection screen

 

 

 

 

 

No audio: No sound in the corresponding mode.

 

Audio 1-4: Selects Audio 1 through 4 for receiving sound in the corresponding mode.

 

*You can select Audio4 when P-TE1000E is installed.

*Repeat steps (2) and (3) for each piece of input equipment.

(4)Press to store.

*Audio Input menu will not be displayed when “No Audio” is selected.

E-38