Deleting a VLAN
To delete a VLAN,
1Click the "Tools" menu → "Configure a Team".
If there is more than one team, click the name of the team that has the VLAN you want to delete, and then click [OK].
2Click [Remove VLAN].
3Click [Apply].
Click [Yes] when the message is displayed indicating that the network connection will be temporarily interrupted.
`If you delete a team, any VLANs configured for that team are also deleted.
Configuring LiveLink for a Smart Load Balancing and Failover Team
Read the following notes before you attempt to configure LiveLink.
`Before you begin configuring LiveLink™, review the description of LiveLink. Also verify that each probe target you plan to specify is available and working. If the IP address of the probe target changes for any reason, LiveLink must be reconfigured. If the MAC address of the probe target changes for any reason, you must restart the team. (J"4.8.10 Troubleshooting Teaming Problems"(pg.147).
`A probe target must be on the same subnet as the team, have a valid (not a broadcast, multicast, or unicast),
`To ensure network connectivity to the probe target, ping the probe target from the team.
`You can specify up to four probe targets.
`The IP address assigned to either a probe target or team member cannot have a zero as the first or last octet.
E
