Fujitsu S7100 manual Port Replicator Problems, Hard Drive Problems, Keyboard or Mouse Problems

S7110.book Page 59 Monday, March 20, 2006 1:56 PM

		T r o u b l e s h o o t i n g
Problem	Possible Cause	Possible Solutions
The Media Player Drive	The Windows DVD/CD-RW/	This is normal; however, you may disable this feature.
Access indicator on the	CD-ROM auto insertion func-
Status Indicator Panel	tion is active and is checking to
blinks at regular intervals	see if a disc is ready to run.
when no disc is in the tray
or the optical drive is not
installed.
Port Replicator Problems

Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port.

LifeBook notebook does	Port Replicator AC adapter is	Provide power to the Port Replicator.
not turn on when installed	not plugged in.
in the optional Port
	Notebook is not properly	Remove and re-dock your LifeBook notebook.
Replicator
	seated in the Port Replicator.
Floppy Disk Drive Problems
You cannot access your	You tried to write to a write	Eject the floppy disk and set it to write enable.
floppy disk.	protected floppy disk.	(See Preparing a Disk for Use on page 42 for more
		information)
	Floppy disk is not loaded	Eject floppy disk, check orientation and re-insert.
	correctly.	(See Ejecting a Disk on page 42 for more information)
	The floppy disk drive may not	Remove and re-install your floppy disk drive.
	be properly installed.
	Security is set to protect access	Verify your password and security settings.
	to floppy disk data.
Hard Drive Problems
You cannot access your	The setup utility is incorrectly	Revise BIOS settings to set both Primary Master
hard drive.	set for your internal (Primary	and Primary Slave correctly. (See BIOS Setup Utility
	Master) or optional second	on page 29 for more information)
	hard drive (Primary Slave).
	The wrong drive designator	Verify drive designator used by application is in
	was used by an application	use by the operating system. When the operating
	when a bootable CD-ROM was	system is booted from a CD, drive designations
	used to start the notebook.	are automatically adjusted.
	Security is set so your oper-	Verify your password and security settings.
	ating system cannot be started
	without a password.
Keyboard or Mouse Problems
The built-in keyboard does	The notebook has gone into	Push the Power/Suspend/Resume button.
not seem to work.	Standby mode.
	Your application has locked	Try to use your integrated pointing device to restart
	out your keyboard.	your system.
You have installed an	Your external device is not	Re-install your device. (See Device Ports on page 52
external keyboard or	properly installed.	for more information)
mouse, and it does not
seem to work.
		59