Fujitsu S7100 manual Detaching the Port Replicator, Changing the Alignment Bar

S7110.book Page 51 Monday, March 20, 2006 1:56 PM

Figure 4-18. Changing the Alignment Bar

3.With the alignment bar in vertical position, position the system so that the right side is aligned with the right stop. (Figure 4-19)

U s e r I n s t a l l a b l e F e a t u r e s

DETACHING THE PORT REPLICATOR

The optional port replicator can be detached from your notebook while the power is on, while in standby mode, or while the power is off. To detach the port replicator follow these easy steps:

1.Pull the port replicator latch release outwards. (Figure 4-20)

2.While holding the port replicator latch release, lift your notebook to detach it from the port replicator.

Figure 4-20. Detaching the notebook

Right stop

Figure 4-19. Aligning the notebook

4.Push your notebook down to connect it securely to the port replicator.

5.Plug the AC adapter into the DC power jack and plug the other end into a power outlet.

51