Do not operate your media drive unless your system is sitting on a relatively flat surface. Using the drive when the system is not level may damage the drive or prevent proper operation.
LOADING MEDIA
(Refer to Figure 8 for the following steps) To load a disc into your media player drive, follow these steps:
1.Push and release the eject button on the front of the drive to open the holder tray. The tray will come out of the system a short distance.
2.Gently pull the tray out until a media disc can easily be placed in the tray.
There may be a protective sheet in the tray from when it was shipped; please make sure it is removed before operating the drive.
3.Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray.
4.Gently push the holder tray back in until you hear a click.
REMOVING MEDIA
(Refer to Figure 8 for the following steps)
1.Push and release the eject button on the front of the media player drive. This will stop the drive and the holder tray will come out of the system a short distance.
2.Gently pull the tray out until the disc can easily be removed from the tray.
3.Carefully remove the media disc from the holder tray.
4.Gently push the holder tray back in until youhear a click.
Tablet Dock User’s Guide
Figure 8. Loading/Ejecting Media
9
