Fujitsu ST5000 warranty Hdd, Access

G e t t i n g S t a r t e d

In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off.

	Icon		Mode/State	LED State	Remarks
Battery		•	On State	Green, continuous	Battery charge is between 50%-100%
		•	Idle Mode
				Amber, continuous	Battery charge is between 13%-49%
				Red, continuous	Battery charge is between 0%-12%
				Red, blinking	There is a battery error.
		•	Suspend-to-RAM,	Green, blinking slow	Battery charge is between 50%-100%.
			without AC adapter
				Amber, blinking slow	Battery charge is between 13%-49%.
		• Suspend-to-RAM
			with AC adapter	Red, blinking slow	Battery charge is between 0%-12%.
		•	Hibernate	Off	Battery is not installed, or system is off or in
			(Save-to-Disk),		Hibernate mode.
			with AC adapter
		•	Off State
		•	Hibernate		If battery is inserted during power off, LED blinks
			(Save-to-Disk),		amber for 4 seconds to detect battery. Battery
			without AC adapter		status is displayed for 5 seconds after that.
	HDD	•	On State (or	Green	Displayed when hard disk drive is accessed.
	Access		flashing)
		•	Idle Mode
		•	Suspend-to-RAM	Off	Hard disk drive is not being accessed.
		•	Hibernate
			(Save-to-Disk)
		•	Off State
Security		•	On State	Green, continuous	The Security Indicator lights (if a password was
				(until password is	set) when the system resumes from Off or
				entered)	Standby modes. You must enter the password
					that was set in the Security Panel before your
					system will resume operation.

Table 1-2. System Status Indicators

9