Fujitsu ST5000 warranty Stopping Transmission, Starting Transmission, Deactivation using Windows

S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A

STOPPING TRANSMISSION

To use this product inside hospitals, clinics, or airplanes, or in other places where the use of electronic equipment is regulated, stop the transmission of radio waves from the wireless LAN beforehand.

Deactivation using the wireless switch

The transmission of radio waves from the wireless LAN can be stopped by setting the wireless switch to the Off position. Note that the wireless LAN On/Off switch has no effect on non-wireless LAN models.

(See Figure 3 for Wireless LAN switch location.)

Wireless LAN

On/Off

Switch

Figure A-3. Wireless LAN On/Off Switch

Deactivation using Windows

Intel PROSet Wireless LAN:

1.Click [Start] --> [(All) Programs] --> [Intel Net- work Adapters] --> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.

2.Click the General tab.

3.Select [Off] for the wireless communications Switch Radio: function, and then click the [OK] button. Wireless communications on/off switching will be deactivated and the transmission of radio waves from the wireless LAN will be stopped.

To restart transmission, select [On] for the wireless communications Switch Radio: function, and then click the [OK] button.

Atheros Wireless LAN

1.Click [Start] --> [Control Panel] --> [Atheros Cli- ent Utility]. The Atheros Wireless Configuration Utility window will be displayed.

2.Click the Wireless Networks tab.

3.Click the [Enable Radio] box to clear it, then click the [OK] button. Wireless communications on/off switching will be deactivated and the transmission of radio waves from the wireless LAN will be stopped.

To restart transmission, check the [Enable Radio] checkbox to select it., then click the [OK] button.

STARTING TRANSMISSION

To communicate using the wireless LAN function, set the computer to a status from which it can transmit, as follows:

Intel PROSet Wireless LAN:

1.Set the wireless switch to the On position.

2.Click [Start] --> [(All) Programs] --> [Intel Net- work Adapters] --> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.

3.Click the [General] tab if it is not already selected.

4.Select [ON] for the Switch radio: function, then click [OK]. Wireless communications on/off switching will be activated and the transmission of radio waves will be restarted.

Atheros Wireless LAN:

1.Click the Wireless Network Connection icon in the system tray at the lower right of your screen.

2.Click [Enable Radio]. The radio will be turned on. Access Point Mode: Transmission is enabled.

Ad Hoc Mode: Restart your computer to enable the radio.

52