Manage Disk Volumes 19
3. Type the type command at the format> prompt, then select 0 (zero) to
autoconfigurethe volume.
4. Use the partition command to partition, or slice, the volume according to
your desired configuration.
See the format(1M)man page for additional information.
5. Write the new label to the disk using the label command.
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
volname - execute <cmd>, then return
quit
format> type
AVAILABLE DRIVE TYPES:
0. Auto configure
1. DEFAULT
2. SUN72G
3. SUN72G
4. other
Specify disk type (enter its number) [3]: 0
c0t2d0: configured with capacity of 68.23GB
<LSILOGIC-LogicalVolume-3000 cyl 69866 alt 2 hd 16 sec 128>
selecting c0t2d0
[disk formatted]
format> label
Ready to label disk, continue? yes