Use Logical Domains Software 39
Logical Domain Configurations
The Logical Domain configurations are stored on the service processor (SP). Using
Logical Domains Manager CLI commands, you can add a configuration, specify a
configuration to be used, and list the configurations on the service processor.You can
also use the ILOM set /HOST/bootmode config=configfile command to specify an
LDoms boot configuration. For further information about /HOST/bootmode, see
your server’s ILOM supplement.
Logical Domains Software Requirements
The following software is required or recommended for LDoms on the SPARC
Enterprise T5440 server:
■(Required) Solaris 10 11/06 OS – Refer to the Solaris 10 Collection for more
information.
■(Required) Solaris 10 11/06 OS patches:
■124921-02, which contains updates to the Logical Domains 1.0 drivers and
utilities. Logical Domains networking will be broken without this patch.
■125043-01, which contains updates to the console (qcn) drivers. This patch
depends on KU 118833-36, so if this is not alreadyupdated on your system, you
will need to do so.
For further information about patches, see the product notes for your server.
■(Required) System firmware version 6.4.x – Refer to your server’s documentation
for more information.
■(Required) Logical Domains Manager 1.0.x software.
■(Recommended) Solaris Security Toolkit4.2 software – Refer to the Solaris Security
Toolkit 4.2 Administration Guide and Solaris Security Toolkit4.2 Reference
Manual for more information
Note – During the boot process, domains that use virtual boot devices must wait for
their service domains to come online first. This can prolong the boot process.