Fujitsu Siemens Computers A3130 Checking the Memory Capacity, Removing a Memory Upgrade Module

falcon3.book Page 43 Thursday, May 24, 2007 8:44 AM

Figure 4-11. Removing a Memory Upgrade Module

4.Store the memory upgrade module in a static guarded sleeve.

5.Replace the cover and reinstall the screw.

CHECKING THE MEMORY CAPACITY

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to check that your notebook has recognized the change.

Check the memory capacity by clicking [Start] -> Control Panel -> System and Maintenance -> System. The amount of memory is displayed next to “Memory - RAM”.

If the total memory displayed is incorrect, check that your memory upgrade module is properly installed. (If the module is prop- erly installed and the capacity is still not correctly recognized, see Troubleshooting on page 49.)

U s e r I n s t a l l a b l e F e a t u r e s

43