Safety, precautionary and compliance instructions
•External units, such as monitors, joysticks, etc., may only be connected to the interface ports with screened cables to meet the harmonised standards under electromagnetic compatibility (EMC) legislation.
•You may only operate the unit if its rated voltage matches the local mains voltage.
Information on R&TTE Directive•Fujitsu Siemens Computers hereby declares that the
•The complete original declaration of conformity for the R&TTE Directive can be found in your PC’s electronic documentation.
Computer setup•Before you change, install or remove any components, disconnect the mains plug and, if applicable, detach the telephone cable from the PC (pull out the plug).
•Before you open the housing, you must switch the PC off and remove the plug from the socket. The proper operation (according to IEC 60950/EN 60950) of the unit is only guaranteed with a fully attached housing and covers for installation slots ( electrical shock, cooling, fire prevention, noise suppression).
•Only authorised qualified personnel should open the unit. Tampering with the unit will result in a loss of the right to guarantee claims and the discontinuation of the manufacturer's guarantee obligation to uphold the harmonised standards according to the law regarding the electromagnetic compatibility of units and low voltage directive.
•All integrated circuits and memory modules, as well as the contacts on all sockets and plugs, are susceptible to static electricity. Protect these from static electricity. The effect of static electricity, rapid transients or strong electromagnetic fields on the unit may cause faults. When exchanging or installing a board or a memory module, touch an earthed object or carry a ground strap to divert any electrostatic charge from your body.
•All ports are only designed for connection of safety
2