Deactivate the "DirectDraw acceleration" function.
... on connecting and the settings for a second screen output device (TV, monitor)
If your PC is equipped with a second screen connection, this is generally located on the rear of the PC; it can be that after a driver is reinstalled the playback screen of the second output device (monitor or TV) may be dark. This may happen if you have downloaded and used a new driver version from the Internet. The standard default for the driver is only configured for one screen output device.
If you wish to use the second output, note the following from the user manual of the 2nd device:
•Which settings and which sockets do I need to use to run the device as a monitor for example?
•What television standard is for example the TV set to?
If the user manual is no longer available, contact your dealer or a television specialist in your area.
Now proceed as follows to use the second output device:
•Switch the PC and both screen devices off. Connect the screen devices to the PC. Turn the screen devices on, followed
9