Fujitsu Siemens Computers Fujitsu-Siemens PC This is a, Network key, computer-to, Data encoding, two WLAN devices, Network name (SSID), computer network; wireless access points are not used

5.Enter the SSID in the "Network name (SSID)" field of the device to which the connection is to be established. The network names (SSID) can be obtained from the operator of the receiver.

If the connection requires data encoding, activate the function "Data encoding" and enter the required key in the "Network key" field.

6.Click on "OK".

To connect two WLAN devices with each other in ad-hoc mode, execute the specified steps for both devices and enter the same SSID in this window. Activate the function "This is a computer-to- computer network; wireless access points are not used". Click on "OK".

This display will appear in the task bar next to the clock after successful connection:

The signal strength displayed may vary due to external influences.

If you double click on the active connection (both screens in the task bar), a window containing status information will appear. This may differ depending on the network setup.

26