S t y l i s t i c S T S e r i e s T a b l e t D o c k
■Prolonged use of the media drive, such as watching a DVD movie, will signifi- cantly reduce your battery life if no other power source is attached. Be sure to attach a power adapter when using the Tablet Dock for prolonged tasks.
■You should periodically check the Fujitsu Web site at us.fujitsu.com/computers for updated drivers.
■All Fujitsu DVD players are set to play DVD titles with region code number 1 (North American market). The region number is a regional restriction code defined by the DVD Forum acting on requirements of Hollywood. Different region codes are recorded on video DVD titles for publication in different areas of the world. If the regional code of the DVD player does not match the codes on the titles, then playback is impossible. You can change the region code on the DVD player using the Properties menu of the DVD software, but you can only change the region code up to four times. After the 4th change, the last region code entered becomes permanent, and cannot be changed.
LOADING MEDIA
(Refer to Figure 8 for the following steps)
To load a disc into your media player drive, follow these steps:
1.Push and release the eject button on the front of the drive to open the holder tray. The tray will come out of the system a short distance.
2.Gently pull the tray out until a media disc can easily be placed in the tray.
There may be a protective sheet in the tray from when it was shipped; make sure it is removed before operating the drive.
3.Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray.
4.Push the holder tray back in until you hear a click.
REMOVING MEDIA
(Refer to Figure 8 for the following steps)
1.Push and release the eject button on the front of the media player drive. This will stop the drive and the
holder tray will come out of the system a short distance.
2.Gently pull the tray out until the disc can easily be removed from the tray.
3.Remove the media disc from the holder tray.
4.Push the holder tray back in until you hear a click.
Figure 8. Loading/Ejecting Media
6
