Custom Screens
Status Indicator Lights
Table 5-10 Special Message Screens
Display | Description | ||
|
|
| |
|
| The “ ” in these two screens (see Table | |
|
| indicates that the unit is derating its output power because the | |
|
| inverter heat sink temperature is above 75° C (167° F). | |
Unit |
| ||
| The asterisk only appears when the power is actually being | ||
|
| ||
| 7*10.82k0 | limited by the inverter. | |
|
|
| |
Insufficient | Indicates the GT Inverter is not producing power due to | ||
insufficient solar energy during low light conditions in early | |||
SolarEnergy | |||
morning or late afternoon or when the PV array is in shade. | |||
|
| ||
|
| This screen flashes alternately with the Normal Operation | |
|
| default screen. | |
suchTodayas the name56kWhor0Wlocation of the PV array associated with the inverter.
Two cu tom s re | s are available. The inverter does not display them unless they | |
are | f gured usi | a computer connected to the |
box. If programmed, the custom screens display as the fourth and fifth screens
during | he startup sequence. They can also be viewed by tapping the unit during |
normalSystem*35operation and fault mode.* | |
The fir | custom15.screen is intended for the home owner to display information |
The second custom screen is intended for installers, who can configure the screen to disp ay, or example, contact information for service.
A PC gr phical user interface that can be used for configuring custom screens is availab e for download at www.xantrex.com.
Status Indicator Lights
The GT Inverter is equipped with two status indicator lights (LEDs) located below the front panel LCD (Figure
Only one indicator light will be lit at any time.
Table 5-11 Status Indicator LEDs
GREENLEDonMeansGT Inverter is on (DC voltage and AC voltage are qualified and the protection timer has finished) and delivering energy to the grid. No action required. Turns off when a fault state is detected.
