Xantrex Technology GT3.0 owner manual Male Network Terminator

	Communications Wiring for Inverters in Parallel
Terminators	Male network terminators (Figure 3-8) are required at both ends of the network to
	ensure the communication signal quality on the network.

	Figure 3-8	Male Network Terminator
GT Inverter Xanbus	Two RJ45 ports are provided in the GT Inverter, accessible from the wiring box.
Ports	See Figure 3-9 for the location of these ports.
	RJ11 ports	RJ45	RS-232 port (used to connect a PC to use the GUI.
	(not used)	Xanbus ports	See “Custom Screens” on page 5–9)

Male network terminator

Figure 3-9Xanbus RJ45 Ports in the GT Inverter Wiring Box

975-0131-01-01 3–13