Xantrex Technology GT3.0 Special Screens, Additional Fault Mode Screens, Display Description

Monitoring the Inverter

Additional Fault	Additional message screens can be viewed in fault mode by tapping the Xantrex
messages for all	logo near the LCD. Each additional tap displays the next screen in the order
systems	shown in Table 5-9.
	Table 5-9Additional Fault Mode Screens
	Tap	Display*		Description
	1st time	Current fault message		LCD backlight turns on for better readability.
		screen (see Table 5-8)
	2nd time	System0W		Energy being produced by the system now.
				Cumulative energy produced by the system
				today.
	3rd time	System Lifetime		Lifetime energy produced by the GT Inverter
				system.
	4th time	Tod		Length of time inverter was online today, in
		meOnl
		Grid Readings		hours (hh), minutes (mm) and seconds (ss).
	5th time	ay		Immediate DC voltage and current readings of
				power from the PV array.
	6th time		.	Immediate AC voltage and frequency readings
				of power from the Grid.

* In a multiple unit system w th communications cables properly installed, the system values displ yed are for the entire system. Time online and array readings a for the local inverter and PV array associated with that inverter.

Special Screens				ns2.500kWhre displayed in specific situations that are not
	Special message		cr
	considered fault		uations. They can appear in any mode of operation. These
	screens are desc ibed in T ble 5-10.
	Table 5-10 Special			305kWhMessage Screens
	Display				Description
	Arr				hh:mm:ss
	sssInverterOfflinesecods				Time remaining in seconds (sss) before the GT Inverter
		350.5V84Areconnects to the Grid. This is a protection timer; it runs for
					approximately five minutes at startup and after any Grid fault.
	242.6V600Hz
	GT Inverter switching (or has switched) from Normal
	Reconnectigin				Operation to Offline mode. This screen may flash alternately
					with a Fault message screen.
5–8						975-0131-01-01