Introduction

Removable Components

The wiring box is standard for all North American models of the GT Inverter. Some European models are available without the wiring box. See “Model Configurations” on page 1–8 for specific details. The heat sink cover and fan assembly are available in the optional Fan Kit.

Wiring Box (standard on North American models)

The wiring box provides a location for making AC, DC and ground connections. It also contains the combined AC/DC (Utility/PV array) Disconnect Switch.

The GT Inverter unit may be easily removed from the wiring box in the event that the inverter requires servicing.

Important: In North America and other locations the wiring box is an electrical code requirement. It must be attached during operation. Check with your local authorities before removing the GT Inverter wiring box.

DC Connect holes

Control Board

 

Connect hole

AC Connect hole

Wiring Box

1.9 cm (3/4”) Threaded

Front Cover

Conduit holes

AC/DC Disconnect

Switch

Figure 1-4Wiring Box for the GT Inverter

1–6

975-0131-01-01

Page 26
Image 26
Xantrex Technology GT3.0 owner manual Removable Components, Wiring Box standard on North American models