Accessible drives | Installing a backup drive |
6.2Installing a backup drive
ÊOpen the server (see section “Opening the server” on page 19).
ÊRemove the crosspiece (see section “Removing the crosspiece” on page 20).
ÊRemove the drive cage (see section “Removing the drive cage” on page 21).
Figure 13: Removing the protection shield from the 3.5-inch bay
ÊGrasp the protection shield through the holes and pull it out in the direction of the arrow.
VCAUTION!
Store the protection shield in a safe place. If the backup drive is removed again and not replaced with a new one, then the protection shield must be reinstalled due to cooling, the applicable EMC regula- tions (regulations on electromagnetic compatibility) and fire protection.
TX120 | Options Guide | 31 |
