FUNAI CIWL3206 Sleep Timer, Optional Settings Setup Screen, Watching TV / Optional Settings

SLEEP TIMER

The Sleep Timer function will automatically turn off the power of the unit at a preset time.

POWER	SLEEP	INPUT
		SELECT

1	2	3
4	5	6
		AUDIO
7	8	9
		STILL
-	0
SETUP		SCREEN
		MODE

ENTER

1Use Sleep Timer.

•Press [SLEEP] on the remote control.

•The setting display for Sleep Timer is shown on the screen.

SleepOff

2Set the timer.

•You can select 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes by pressing [SLEEP].

(You cannot set the timer per one minute. )

•You can set the timer up to 90 minutes.

•After setting, you can check the remained time per 1 minute by pressing [SLEEP].

•To cancel the sleep timer, press [SLEEP] repeatedly until “Sleep Off” is displayed.

•The Sleep Timer setting display will automati- cally disappear in a few seconds.

SleepOff

NOTE:

•When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be can- celled.

OPTIONAL SETTINGS

SETUP SCREEN

This section describes the overview of the setup screen displayed when you press [SETUP].

For more details, see the reference page for each item.

The setup screen consists of the function setting items below.

•

To exit settings.

•

You can adjust the picture quality (Picture Mode, Brightness, Contrast, Color, Tint, Sharpness, Color Temp., and Energy Saving).

(Refer to “PICTURE ADJUSTMENT” on page 24.)

•

You can automatically scan the receivable channels and watch or skip the channel as necessary. (Refer to “AUTOSCAN” on page 13.)

•

You can change the display format for Closed Caption as well as varied font styles, which dis- plays the dialogue of a TV program or other infor- mation across the screen. (Refer to “CLOSED CAPTION” on page 25.)

Also, can set the viewing limitations such as V-Chip of an MPAA rating and the TV rating. (Refer to “V-CHIP” on page 28.)

HDMI Audio if the TV is connected to digital exter- nal device such as DVD player. (Refer to “HDMI AUDIO” on page 31.)

•

You can change the language (English, Spanish, French) displayed in the setup screen.

(Refer to “LANGUAGE SELECTION” on page 17.)

NOTE:

• To move to the normal screen, press [SETUP].

WATCHING TV / OPTIONAL SETTINGS

23

EN