FUNAI DVD3315V owner manual Troubleshootingtro Ting, Troubleshooting Guide

TROUBLESHOOTINGTRO TING

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this manual. Refer to the following:

DVD • VCR

VCR

DVD

		Symptom	Remedy
No power.			• Make sure the power plug is connected to an AC outlet.
			• Make sure the power is turned on.
This unit does not respond to the			• Check if the power plug is connected to an AC outlet.
remote control.			• You have to be within 23 feet (7m) of this unit.
			• Check if a cassette tape or disc is in this unit.
Poor picture or noise.			• Interference signal may be received. Change the position and direction of the unit.
Cannot record a TV program.			• This unit does not have a tuner to receive TV broadcasting.
			• You must connect this unit to TV with audio/video output jacks or an external tuner to
			record TV programs. Refer to “Recording & OTR (One -touch Timer Recording)” on page 20
			and “Satellite Link” on page 22.
Timer recording is impossible.			• Make sure the timer program is set correctly.
			• Make sure [TIMER REC] indicator on this unit lights up. If not, press [TIMER SET].
			• Make sure the VCR clock is set correctly.
Cannot go into record mode.			• Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape.
			• Activate this unit in VCR mode. Press [VCR ] on the remote control so that the [VCR]
			indicator will illuminate.
Playback picture is partially noisy.			• Adjust tracking control for a better picture by pressing [TRACKING K / L].
Cannot view a picture but the audio			• Head cleaning may be necessary. Refer to “Auto Head Cleaning” (page 27).
is OK.
No or poor, playback picture.			• Fine tune your TV.
			• Connect the video cable firmly.
Video or color fades in and out when			• You cannot copy a copyrighted cassette tape.
making a copy of a cassette tape.
Cannot remove the cassette tape.			• Check if this unit is in the VCR mode. If not, press [VCR ] on the remote control to switch
			the mode.
No picture.			• Connect the video cable firmly.
			• Insert a correct video disc that can be played back on this unit.
			• Press [DVD ] on the remote control. Check if the [DVD] indicator will illuminate. Then try
			other DVD features.
Disc cannot be played back.			• Insert the disc.
			• Clean the disc.
			• Place the disc correctly with the label side up.
			• Cancel the parental lock or change the control levels.
			• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on
			its surface.
No sound.			• Connect the audio cables firmly.
			• Turn on the power of the audio component.
			• Correct the audio output settings.
			• Correct the input settings on the audio component.
No DTS audio is output.			• This unit does not support DTS audio.
Distorted picture.			• Connect this unit directly to the TV.
			• There are some cases where pictures may be slightly distorted, and those are not a sign of a
			malfunction.
			• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language does not			• The selected language is not available for audio or subtitles on the DVD.
match the setting.
The camera angle cannot be			• The DVD does not always contain sequences recorded from different camera angles.
changed.
Audio or subtitle language			• The DVD does not always contain audio source or subtitles in the selected language.
cannot be changed.
“		” appears on the TV screen,	• The operation is prohibited by this unit or the disc.
	prohibiting an operation.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.

•Playback from a desired track and random playback are not available during programmed playback.

•Some functions are prohibited on some discs.

26 EN