FUNAI DVD3315V owner manual Timer Recording, To Check, Correct or Cancel a Timer Program

RECORDING

Timer Recording

VHSVHS	Press	VCR first.
1	SETUP		/	to select
	Press	, use
	“TIMER PROGRAMMING”.
	Then, press		to go to next step.

- M E N U -	TIMER PROGRAMMING
B TIMER PROGRAMMING	PROG	12345678
SATELLITE LINK	DATE
AUTO REPEAT [OFF]
	START	TIME
CLOCK SET
LANGUAGE SELECT	END	TIME

L1/L2

REC SPEED

Available program

number blinks.

2 Use		/	to select an	DATE		– – / – –
	empty program number. Then,			PROGRAM NUMBER 1
				END	TIME	– – : – –	– –
				START	TIME	– – : – –	– –
	press		to go to next step.	L1/L2		– –
				REC	SPEED	– –
3 Use	/	to select	PROGRAM NUMBER 1
	“ONCE“, “DAILY“ (Mon-Fri), or				DAILY
					B ONCE
	“WEEKLY“. Then, press				WEEKLY
	to go to next step.
4 Use	/	to select the	PROGRAM NUMBER 1
				ONE TIME PROGRAM
	desired month. Then, press			DATE	1 0 / 2 1 TUE
				START	TIME	– – : – –	– –
	to go to the next step.			END	TIME	– – : – –	– –
				REC	SPEED	– –
				L1/L2		– –

Then, repeat procedures above to select the day, start time, end time, and “L1” or “L2” as well.

5 Use	/	to select			ONE TIME PROGRAM
					PROGRAM NUMBER 1
recording speed. Then, press			CLEAR	.	DATE		1 0	/ 2 1 TUE
					START	TIME	0 7	: 3 0	PM
					END	TIME	0 8	: 3 0	PM
					L1/L2		L1
					REC	SPEED	SP
						B SP
							SLP

To set another program after step 5, press . Then, repeat procedures from steps 2 through 5.

You can program the unit to record up to 8 programs, and up to 1 year in advance.

6 Press TIMER SET to set the timer standby mode.

The [TIMER REC] indicator on this unit lights up and the unit goes to the DVD mode.

Note: • To go back one step, press [s] during steps 3 to 5.

•Select “L1” or “L2” to activate rear input jacks or front input jacks accordingly.

To Check, Correct or Cancel a Timer Program

1)Press [TIMER SET], and then press [VCR ] on the remote control.

2)Repeat procedures in step 1 above.

3)Use [K / L] to select the program number you want to check. The details of the program you select will appear on the TV screen.

Use [s / B] to go to the digit you want to change. Then, use [K / L] to enter the correct numbers. You can cancel the entire program by pressing [s] while the program number blinks.

4)Press [CLEAR] to exit.

5)Press [TIMER SET] to return to the timer standby mode.

To Cancel a Timer Recording in Progress

Press [STOP/EJECT C A] on the unit.

Note for Timer Recording & OTR

•If there is no cassette tape in the unit or the cassette tape does not have the erase-protection tab,

the [TIMER REC] indicator blinks and timer recording cannot be performed.

•If there is a power failure occurred or the unit is unplugged for more than 30 seconds, clock setting and all programmed timer recordings will be lost.

•If a cassette tape runs out before an OTR or a timer recording is finished, the unit ejects the cassette tape.

After an OTR or a Timer Recording Has Been Set, This Unit Operates as Follows:

•Press [TIMER SET] on the remote control or [STOP/ EJECT C A] on the unit, then press [VCR ] to activate the VCR function again.

•To cancel the timer standby mode, press [TIMER SET] on the remote control or [STOP/EJECT C A] on the unit, then press [VCR ] to activate the VCR function again.

When an OTR or a Timer Recording is Completed.

•If “AUTO POWER OFF” function for DVD has been activated and some timer programming are left, the [TIMER REC] indicator lights up and the unit goes to the timer standby mode.

•The [TIMER REC] indicator blinks if there are no more timer programming.

•If auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during OTR, timer standby mode and timer recording.

•Press [STOP/EJECT CA] on this unit or [TIMER SET] on the remote control to use the VCR when the unit is turned off.

To Use the DVD Player During Timer Recording or While the [TIMER REC] Indicator is On or Blinking.

•Press [STANDBY-ON]to turn on the unit. Press [DVD ] on the remote control to choose DVD mode. Then continue with the other DVD features as described in this manual.

PRECAUTIONS PREPARATION BASIC OPERATIONS ADVANCED PLAYBACK RECORDING OPTIONAL SETTINGS TROUBLESHOOTING INFORMATION

EN 21