Settings for Audio cont’d | FUNAI FDRV90E manual

Settings for Audio (cont’d)

		Original	• Select a setting using K / L buttons, then		Note
		OFF	press ENTER button.		When playing disc with copy-
		OFF	Your setting will be activated.		When playing disc with copy-
			Auto	: Select “Auto” usually.	right protection
	PCM	Auto	Auto	: Select “Auto” usually.	• If you select “Auto”, the sound
	PCM	Auto	48kHz	: If your amplifier/decoder is NOT com-	• If you select “Auto”, the sound
ntrol		48kHz	48kHz	: If your amplifier/decoder is NOT com-	will be down sampled at 48kHz.
		48kHz			will be down sampled at 48kHz.
	DolbyONDigital			patible with 96kHz PCM, select “48kHz”.	• If you select “96kHz”, no digital
udio		96kHz		96kHz sound will be output in 48kHz.	sound will be output. Select
udio	DTSOFF			96kHz sound will be output in 48kHz.	sound will be output. Select
			96kHz	: If your amplifier/decoder is compatible	“Auto”, so that outputting
				with 96kHz PCM, select “96kHz”. 96kHz	48kHz digital sound.
				with 96kHz PCM, select “96kHz”. 96kHz	48kHz digital sound.
				sound will be output.

	Original	• Select a setting using K / L buttons, then		Note
	Original	press ENTER button.		When playing a DVD-RW
		press ENTER button.
	OFF	Your setting will be activated.
	OFF	Your setting will be activated.		disc recorded in VR mode
	PCM	PCM	: Convert the Dolby Digital into PCM	• If the audio source on a disc is
			(2 channel).	• If the audio source on a disc is
			(2 channel).	Dolby Digital format, set “Dolby
ntrol	Dolby DigitalPCM		When your amplifier/decoder is NOT com-	Digital” to “PCM” so that you
udio	Stream		patible with Dolby Digital, set to “PCM”.	can switch to main (L), sub
udio	DTSOFF	Stream : Outputs Dolby Digital signals.		audio (R), or a mix of both (L/R)
			When your amplifier/decoder is compati-	with your amplifier/decoder.
			ble with Dolby Digital, set to “Stream”.

	Original		• Select a setting using K / L buttons, then press ENTER button.
	OFF		Your setting will be activated.
	OFF		ON	: Outputs DTS signals.
	PCM			When your amplifier/decoder is compatible with DTS, set to “ON”.
	PCM		OFF	: No DTS signal is output.
ntrol	ON		OFF	: No DTS signal is output.
ntrol	ON			When your amplifier/decoder is NOT compatible with DTS, set to
	Dolby Digital
udio	DTS	ON		“OFF”.
		OFF

Set to ON to compress the range between soft and loud sounds.

Before you start Connections Getting started Recording Playing discs Editing Changing

•Select a setting using K / L buttons, then press ENTER

Your setting will be activated.

the SETUP menu VCR functions

Set to ON to output the sound during playback in fast forward of x2.

•Select a setting using K / L buttons, then press ENTER

Your setting will be activated.

Others Español

Français