FUNAI FDRV90E owner manual Connection to an Audio System

Connections

Connection to an Audio System

•When you change the connections, all devices should be turned off.

•Refer to each owner’s manual for further information on other devices.

Before you start

Method 1

Stereo system

Analog audio

input jacks

AUDIO

Method 2

Dolby Digital decoder, DTS

decoder, MD deck or DAT deck

Connections

Audio cable

(supplied)

This unit

AUDIO OUT

DVD/VCR

AUDIO OUT

L

R

or

DVD

AUDIO

OUT

OPTICAL	COAXIAL	Digital audio
		input jacks
Audio Optical		Audio Coaxial
Digital cable	or	Digital cable
(commercially		(commercially
available)		available)

DIGITAL

DVD

AUDIO OUTDIGITAL

AUDIO OUT

OPTICAL COAXIAL

Note

• If output is Dolby Digital encoded audio, connect

to a Dolby Digital decoder and set “Dolby Digital”

Getting started Recording Playing

L

R

(usefull only in

DVD mode)

to “Stream” for the “Digital Out” setting in the

SETUP menu. (Refer to pages 94-95.)

• If output is DTS encoded audio, connect to a DTS

decoder and set “DTS” to “ON” for the “Digital Out”

setting in the SETUP menu. (Refer to pages 94-95.)

• The audio source on a disc in a Dolby Digital 5.1

channel surround format cannot be recorded as

digital sound by an MD or DAT deck.

• Unless connected to a Dolby Digital decoder or a DTS

decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”

for the “Digital Out” setting in the SETUP menu. Playing a

DVD using incorrect settings may generate noise distortion

and may also damage the speakers. (Refer to pages 94-95.)

• Set “Dolby Digital” to “PCM” for the “Digital Out”

setting in the SETUP menu for connecting to an

MD deck or DAT deck. (Refer to pages 94-95.)

• By hooking this unit up to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality Dolby Digital 5.1

channel surround sound as heard in the movie theaters.

• By hooking this unit up to the DTS decoder, you can enjoy

5.1 channel surround system which reproduces the original

sound as truthfully as possible. 5.1 channel surround system

is developed by the Digital Theater System, Inc.

discs Editing Changing the SETUP menu VCR functions Others

Optical cable (not supplied)

•Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them.

•Use a cable which is 3 m or shorter.

•Insert cable plugs firmly into the connectors when making connections.

•If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.

Español Français

15