FUNAI FDRV90E owner manual One-touch timer recording

Recording

One-touch timer recording

Before you

VideoVR

DVD-R DVD-RW DVD-RW

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby.

First: DVD

1

Turn on the unit and load a recordable disc.

Make sure that the TV input is set on the unit.

This operation may take a while to be recognized.

2

Select a recording speed using REC SPEED button.

Refer to "Recording speed" on page 28.

3

Make sure that the recording format is set to the desired mode.

Refer to "Formatting a disc" on pages 30-32.

When a DVD-RW disc is loaded:

You can choose Video mode or VR mode from SETUP menu. "Video mode" has been selected as the default. Refer to pages 30- 31 "Settings for the recording for- mat to a blank disc."

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

4

Select a desired channel to record using CH K / L but- tons or number buttons.

5

Press REC/OTR button, then press REC/OTR button repeatedly until a desired recording time (30 minutes to 8 hours) appears on the TV screen.

Recording will start.

I0:30

0:30

(Normal Recording) 1:00

8:00 7:30

When the unit reaches the speci- fied time, it will turn off automati- cally.

To cancel the one-touch timer recording within the specified time, press STOP C button.

This operation may take a while to be completed.

						start
	POWER			OPEN/
				CLOSE		Connections
	VCR Plus+	.@/:	ABC	DEF
	SEARCH	GHI	JKL	MNO
	MODE
	CM SKIP	PQRS	TUV	WXYZ
	ZOOM		SPACE
	CLEAR/	REC		DISPLAY		Getting started
	C.RESET MONITOR AUDIO
	MENU/LIST			TOP MENU
	RETURN			SETUP
2	VCR	VIDEO/TV		DVD		Recording
	SLOW		REC		5
		SPEED REC/OTR
	SKIP			CH
					4
5
	STOP		PLAY
	REW			FWD
		PAUSE
						Playing discs
						Editing
Note						Changing the
						SETUP
• The remaining recording time
will appear on the display						menu
panel during an OTR. Press						VCR
DISPLAY button to see it on
the TV screen.
						functions
• You cannot pause an OTR.
• The unit will turn off auto-
matically under the conditions
following.						Others
1)No space remained on the
disc.
2)When a power failure
occurs.						Español
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR						Français
keeps the current mode.

35