Connection to an Audio System

Method 1

Stereo system

Analog audio

Method 2

Dolby Digital

decoder, MD deck

OPTICALCOAXIAL

input jacks

AUDIO

L

R

Audio cable

(supplied)

or DAT deck

Optical cable (commercially available)

DIGITAL

AUDIO OUT

Digital audio input jack

DIGITAL OUT

(PCM/BITSTREAM)

OPTICAL COAXIAL

Audio Coaxial

Digital cable

(commercially

available)

Setup

This unit

2CH AUDIO

OUT

2CH AUDIO OUT L (Analog)

 

R

Setting

SETUP > QUICK >

Connection

DOLBY DIGITAL

Connecting to Stereo System.

PCM

* To complete these settings, refer to pages 17-19.

Hint

Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Setting

 

SETUP > QUICK >

Connection

 

 

 

DOLBY DIGITAL

Connecting to a Dolby Digital decoder for

BITSTREAM

Dolby Digital audio output.

 

Connecting to the other equipment (an MD deck

PCM

or DAT deck etc.) without Dolby Digital decoder.

 

 

 

 

* To complete these settings, refer to pages 17-19.

Hint

The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters.

Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Optical cable (commercially available)

Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6 inches (15 cm) or more when storing them.

Use a cable which is 9.8 feet (3 m) or shorter.

Insert cable plugs firmly into the connectors when making connections.

If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

Rear Terminals

OPTICAL jack

 

HDMI OUT jack

 

COMPONENT VIDEO OUT jacks

Connect an optional digital audio cable

 

Use a HDMI connection cable (supplied)

 

Connect optional component video

here through the optional digital audio in

 

to connect to a display with an HDMI

 

cables here through the component

jack of a decoder or audio receiver.

 

compatible port.

 

video in jacks of a television.

 

 

 

 

 

DIGITAL OUT HDMI OUT

2CH AUDIO

COMPONENT

S-VIDEO

(PCM/BITSTREAM)

OUT

VIDEO OUT

OUT

L

Y

CR/PR

 

 

 

 

OPTICAL COAXIAL

 

 

 

 

 

 

R

VIDEO CB/PB

 

 

 

 

OUT

 

 

COAXIAL jack

2CH AUDIO OUT jacks

VIDEO OUT jack

Connect an optional coaxial digital

Connect the supplied

Connect the supplied yellow

audio cable here through the coaxial

audio cables here

 

video cable here through the

digital audio in jack of a decoder or

through the audio in

TV’s video in jack.

audio receiver.

jacks of a television or

 

 

 

 

other audio equipment.

 

 

 

S-VIDEO OUT jack

Connect an optional S-Video cable here through the S-video in jack of a television.

Hint

When there is video out- put from the HDMI OUT jack, no signal is output from the COMPONENT VIDEO OUT jacks.

– 8 –

EN

Page 8
Image 8
FUNAI MSD1005 owner manual Connection to an Audio System, Rear Terminals