FUNAI MSD1005 Front Panel Display, HDMI Setup, HDMI indicator, HDMI Button, 480P, 720P, 1080i

Front Panel Display

H/ ED/ G

HDMI indicator

Lights up when there is video signal output from the HDMI OUT jack.

HDMI Button

Press to set the HDMI connectors video signal output.

			Displays a type of the disc
			which is inserted on the tray.
Lights up when the			• DVD: DVD disc
			• CD: Audio CD, MP3, WMA
A-B repeat function
is on.	Lights up when the			Lights up when the
	repeat function is on.			progressive scan
				system is activated.
			GROUP		P.SCAN
					DVD
					CD
Lights up when
the ALL repeat
			Displays how long the current title or track
function is on.
			has been played back. When a chapter or track is
			switched, the number of a new title,
Lights up when the
			chapter or track is displayed.
inserted disc comes			Selected HDMI output mode is displayed.
to a pause.			Lights up when the inserted
Lights up when playing		back	disc is being played back.
in slow mode. (DVD)

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the Disc

Power off

HDMI output mode (480p) is selected

HDMI output mode (720p) is selected

HDMI output mode (1080i) is selected

HDMI output mode (OFF) is selected

Setup

HDMI Setup

Press [HDMI] on the front panel to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.

•The HDMI indicator on the front panel lights up when HDMI out- put mode is on.

480P 720P 1080i hdOFF

480P (Default): Video output from the HDMI OUT jack at 480p.

720P: Video output from the HDMI OUT jack at 720p.

1080i: Video output from the HDMI OUT jack at 1080i.

hdOFF: No video output from the HDMI OUT connector.

Hint

•Video and audio signals may distorted temporarily when switching to/from the HDMI output mode.

•Use a display equipment with an HDMI-compatible port.

•Progressive video signal will not be output from the COMPONENT VIDEO OUT jacks during the HDMI out- put mode.

•If the HDMI cable is not connected correctly or the other equipment is not turned on, the HDMI indicator on the front panel will not light up even you select the HDMI mode.

•You can check the HDMI connection status by pressing [DISPLAY] during playback with the HDMI output mode (refer to page 7).

•If the TV is not compatible with newly selected HDMI output mode, the actual output mode will be kept the one before changing the selection. When this occurs, the newly selected mode will appear on the front panel display while the actual output resolution will be indicat- ed by performing the on-screen display as described above.

– 9 – EN