FUNAI TB110MW9 Press [STILL], Press [AUDIO] repeatedly

Basic Operation

Choosing Audio Language

You can change languages when the channel provides alternate languages.

Press [AUDIO] repeatedly.

ENGLISH 1/4

SPANISH 2/4

FRENCH 3/4

OTHER 4/4

Audio language changes as follows.

“OTHER” is indicated when the

language is not English, Spanish

NOTE:

nor French.

For international stations audio

language will still be displayed as

English.

Picture Still

You can freeze the image on the TV screen.

Press [STILL].

The image on the TV screen will be paused.

To cancel still mode:

Press any button except [STANDBY-ON]

The sound output will not be

paused.

NOTE:

If “no signal” is detected or protected

signal is received during still mode,

the image remains paused and the

sound output will be muted.

If the TV is left on STILL for a long

period of time, the still image may

cause a burn-in effect damaging the

TV screen.

Contents

INSTRUCCIONES EN ESPAÑOL INCLUIDAS RISK OF ELECTRIC SHOCK DO NOT OPEN gUsin Before CAUTION: INSERT Precautions Location Avoid the Hazards of Electrical Shock and Fire A Note about Recycling Before Using Advanced Operation Connections Others Initial Setup (Setup Wizard) Overview Conexión a un TV sin tomas de A/V Conexión a un TV con tomas de A/V Conexión a una caja de cable Information on Digital Broadcasting Accessories Installing Batteries Location of Controls Page AConnecting to a TV without A/V Jacks BConnecting to a TV with A/V Jacks CConnecting to a Cable Box (Optional) DConnecting to Other Devices Initial Setup 3Select “CONTINUE” using [ s / B] then press [OK] 4 Select the language using [ K / L], then press [OK] 5 Select the connection for audio output using [ s / B], then press [OK] 6Select your time zone using [ K / L], then press [OK] Selecting Channels on the STB ATSC Press [AUDIO] repeatedly Press [STILL] Press [DISPLAY] 1 Press [EPG] while watching TV 2 Select the desired program using [ s/ B] Autoscan (Receiving Channels) Adding/Deleting Channels 5Press [OK] again to add the channel to the channel map 6 Press [SETUP] to exit 4Select “DELETE” using [ K / L], then press [OK] 6Press [SETUP] to exit Operation Adjusting Antenna Selecting Display Mode Information on Display Mode Setting the Time Zone and D.S.T (Daylight Saving Time) V-chipOptions 5Select the desired rating type using [ K / L ], then press [OK] 6Select the desired rating using [ K / L ], then press [OK] repeatedly to switch between view and block 7 Press [SETUP] to exit 4Enter 4737 in the password entry field 5Select“NEW PASSWORD” using [ K / L ], then press [OK] 6Enter the new 4-digitpassword using [the Number buttons] 7Press [SETUP] to exit Closed Caption Options Auto Power Down Viewing Analog TV Method 1 Método Method 2 Método Setting RF OUT Using [SETUP] to Switch “RF OUT” Setting Troubleshooting Symptom Remedy Specifications LIMITED WARRANTY