FUNAI TB110MW9 9

Front Panel

Panel frontal

gUsin Before

1 2

1Remote control sensor

2POWER indicator:

Turns green when the STB is in operation.

Se vuelve verde cuando el STB está en operación.

Rear Panel

Panel trasero

1AC power cord

2AUDIO OUT jacks (Right-red / Left-white): Connect your TV, stereo system or VCR etc. with standard audio cables.

Conecte su TV, sistema estéreo o VCR, etc., con cables de audio estándares.

3VIDEO OUT jack (yellow):

Connect your TV or VCR etc. with a standard video cable.

Conecte su TV o VCR, etc., con un cable estándar de video.

4 5

4ANT. IN jack: Connect an antenna.

Conecte una antena.

5ANT. OUT jack:

Connect to the ANT. IN jack on your TV.

Conecte a la toma ANT. IN de su TV.

Contents

INSTRUCCIONES EN ESPAÑOL INCLUIDAS RISK OF ELECTRIC SHOCK DO NOT OPEN gUsin Before CAUTION: INSERT Precautions Location Avoid the Hazards of Electrical Shock and Fire A Note about Recycling Before Using Advanced Operation Connections Others Initial Setup (Setup Wizard) Overview Conexión a un TV sin tomas de A/V Conexión a un TV con tomas de A/V Conexión a una caja de cable Information on Digital Broadcasting Accessories Installing Batteries Location of Controls Page AConnecting to a TV without A/V Jacks BConnecting to a TV with A/V Jacks CConnecting to a Cable Box (Optional) DConnecting to Other Devices Initial Setup 3Select “CONTINUE” using [ s / B] then press [OK] 4 Select the language using [ K / L], then press [OK] 5 Select the connection for audio output using [ s / B], then press [OK] 6Select your time zone using [ K / L], then press [OK] Selecting Channels on the STB ATSC Press [AUDIO] repeatedly Press [STILL] Press [DISPLAY] 1 Press [EPG] while watching TV 2 Select the desired program using [ s/ B] Autoscan (Receiving Channels) Adding/Deleting Channels 5Press [OK] again to add the channel to the channel map 6 Press [SETUP] to exit 4Select “DELETE” using [ K / L], then press [OK] 6Press [SETUP] to exit Operation Adjusting Antenna Selecting Display Mode Information on Display Mode Setting the Time Zone and D.S.T (Daylight Saving Time) V-chipOptions 5Select the desired rating type using [ K / L ], then press [OK] 6Select the desired rating using [ K / L ], then press [OK] repeatedly to switch between view and block 7 Press [SETUP] to exit 4Enter 4737 in the password entry field 5Select“NEW PASSWORD” using [ K / L ], then press [OK] 6Enter the new 4-digitpassword using [the Number buttons] 7Press [SETUP] to exit Closed Caption Options Auto Power Down Viewing Analog TV Method 1 Método Method 2 Método Setting RF OUT Using [SETUP] to Switch “RF OUT” Setting Troubleshooting Symptom Remedy Specifications LIMITED WARRANTY