Furuno 1954C, 1964C Antenna unit, clamping the rotation detector cable, Part Type Code No Qty

12. Pass the cable from the rotation detector through two cable clamps.

Rotation detector

Cable clamps

Cable tie (Another should be inside.)

Antenna unit, clamping the rotation detector cable

13.Follow the instructions on the label inside the mounting base to secure the snap assy.

14.Confirm that the rubber gasket is properly positioned and that the triangle mark on the radome cover is aligned with the triangle mark on the mounting base, then tighten the fixing screws for the cover. See the sectional view on page 1-8 for how to position the rubber gasket.

Mounting the optional mounting bracket

A mounting bracket for fastening the antenna unit to a mast on a sailboat is optionally available.

Contents of mounting bracket 2 kit Type: OP03-93, Code No.: 008-445-080

Part	Type	Code No.	Qty
Hex. bolt	M4x12	000-804-725	4
Hex. bolt	M8x20	000-805-707	8
Mounting plate	03-018-9001-0	100-206-740	1
Support plate (1)	03-018-9005-0	100-206-780	1
Support plate (2)	03-018-9006-0	100-206-790	1
Bracket (1)	03-028-9101-0	100-206-810	1
Bracket (2)	03-028-9102-0	100-206-820	1
Fixing plate	03-028-9103-0	100-206-830	2

Assemble the mounting bracket and fasten it to a mast. Fasten the antenna unit to the bracket. For details, see the figure on the next page.

1-10