Furuno 1824C, 1954C EMI core, putting into core case, How to pass the rotation detector cable

9.Attach connectors of the antenna cable to the locations shown in the figure below, and then fasten a pan head screw M4x10 to fix shield cable and core case (removed at step 6.)

Pan head screws

M4x10 9 pcs.

J810

(13 pin)

J809

(4 pin)

J801

(9 pin)

Antenna unit, connector location and fixing the shield cable w/core case

10.Put the EMI core on the antenna cable into the core case attached at step 9, with the flat side of the core facing downward.

EMI core

Core case

EMI core, putting into core case

11.Refasten the shield plate and core case cover with 15 screws. Be sure that the cable from the rotation detector passes through the notch between the two cable ties.

Notch

How to pass the rotation detector cable

1-9