Furuno FAX-30 manual Turning on/off specific timer programs

3.FAX OPERATION: PC

11.Click ON below FREQUENCY.

12.Click OK.

13.Click “<back” or Back button several times to return to the top menu.

14.Repeat steps 1-13 to set other timer schedule.

15.At the facsimile standby display, click TIMER SETUP.

16.Click PROGRAM LIST.

17.Click START.

18.Click OK.

19.Click “<back” or Back button to return to the top menu.

Then, the FAX-30 will receive facsimile broadcasts according to the timer schedule. Facsimile images are received line by line, taking 30-40 minutes to receive depending on the size of the image and drum rotation speed at the facsimile station. After a facsimile image is received it is compressed and stored in the image memory and then posted on the facsimile standby display screen. This process takes 3-5 minutes.

3.2.3Turning on/off specific timer programs

1.At the facsimile standby display, click TIMER SETUP.

2.Click PROGRAM LIST.

3.Click the center column of the program no. you want to turn on or off.

4.Click ON or OFF as appropriate.

5.Click OK.

6.Click “<back” or Back button to return to the top menu.

3.2.4Clearing all timer programs

You may clear all timer programs as follows:

1.At the facsimile standby display, click TIMER SETUP.

2.Click PROGRAM LIST.

3.Click CLEAR ALL at the top of the screen.

4.You are asked “Are you sure to clear all?”

5.Click Yes to reset; Cancel to escape.

6.Click “<back” or Back button to return to the top menu.

3-4