Furuno FAX-30 manual Diagnostics PC, Diagnostic test results

6.MAINTENANCE, TROUBLESHOOTING

3.Press the TEST soft key to start the test. The test results appears as shown below.

				TEST
	PROGRAM NO.		0850188-XX
Asterisk marks item			0850189-XX
	* ROM1	: OK
currently being tested	ROM2	: OK
	SDRAM	: OK
	RECEIVE UNLOCK : OK
	SS*1	:	60
	SN*2	:	60
	LAT/LON*3	: OK
				RETURN

XX = Version no.

*1 SS = Signal Strength Display Range: 0-99 Typical Reading: 30-70

*2 SN = Signal-to-Noise Ratio Display Range: 0-99 Typical Reading: 20-60

*3 Requires data sentence GGA or GLL, output through the network.

Diagnostic test results

4. Press the RETURN key to escape from the test.

6.5Diagnostics: PC

The diagnostics test displays program no. and tests the ROMs and RAM, receive ability and position data. The test results are displayed as OK or NG (No Good). For any NG or abnormal value, contact your dealer for advice.

1.At the facsimile or navtex standby display, click FAX-30 SYSTEM SETUP.

2.Click TEST. The test results appears as shown below.

PROGRAM	0850188-XX.XX
NO.	0850189-XX.XX
ROM1	OK
ROM2	OK
SDRAM	OK
RECEIVE	OK
UNLOCK
LAT/LON*	OK

XX.XX = Program Version No.

* = Requires data sentence GGA or GLL.

Diagnostic test results

3.Click STOP TEST to stop the test and restore normal operation and enable receiving.

4.Click “<back” or Back button several times to return to the top menu.

6-4